3D model database

Tip: Complementary lesson plans are available for 3D models marked with zavřít
Tip: Become a licensed YSoft be3D eDee user.​ Premium 3D lesson plans for YSoft be3D eDee users are available for 3D models marked with zavřít
Show filter Hide filter
Sort by: Result count  for
    : 104
    3D Mapping: Czech Republic 3D Mapping: Czech Republic

    3D Mapping: Czech Republic

    A map of the Czech Republic with the country’s largest cities and one of its national parks marked. Use this as a starting point to learn about geography and add other interesting points of interest.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 1 hour 30 minutes
    • Total filament 3.3 m
    • Additional non-printable components
    • Printed all at once
    3D Mapping: United Kingdom 3D Mapping: United Kingdom

    3D Mapping: United Kingdom

    This model has some of Britain’s features highlighted. Add other topographical features and cities to make the study of Britain’s history interesting.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 1 hour 30 minutes
    • Total filament 3.5 m
    • Additional non-printable components
    • Printed all at once
    Aerojet Rocketdyne RS 25 Aerojet Rocketdyne RS 25

    Aerojet Rocketdyne RS 25

    The nozzle of the main space shuttle engine. Can be printed with or without supports. Placing all the nozzles on the print bed will save some printing time.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 2 hours
    • Total filament 1.8 m
    • Additional non-printable components
    • Printed all at once
    ASTRONAUT TOOLKIT ASTRONAUT TOOLKIT

    ASTRONAUT TOOLKIT

    The International Space Station (ISS) is the location for this lesson. Students learn the history of 3D printing in space before accepting the challenge to assist the astronauts with replacing tools needed in their toolkit. Screwdriver bits and wrenches are needed and students design and then test their 3D prints. What other tools might the astronauts need while in space? Can they be 3D printed? Discuss what improvement can be made to the student’s 3D printed tools.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Layer height 0.2 mm
    • Total print time 16 hours
    • Total filament 36 m
    • Additional non-printable components
    • Printed all at once
    Basic Dice Basic Dice

    Basic Dice

    Common dice with dots on its sides. The sum of the numbers on opposing sides is 7. The corners are rounded to increase the rotation of dice.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Set roof and bottom thickness to 1.2mm. Set shell thickness to 1.2mm
    • Total print time 2 hours 15 minutes
    • Total filament 3.8 m
    • Additional non-printable components
    • Printed all at once
    Basic Numbered Dice Basic Numbered Dice

    Basic Numbered Dice

    Dice with numbers instead of dots on the sides. The sum of the numbers on opposing sides is 7.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Set roof and bottom thickness to 1.2mm. Set shell thickness to 1.2mm
    • Total print time 2 hours 15 minutes
    • Total filament 3.8 m
    • Additional non-printable components
    • Printed all at once
    Basic Tensegrity Pyramid Basic Tensegrity Pyramid

    Basic Tensegrity Pyramid

    Tensegrity is a structural principle based on individual pieces under compression inside a structure that is under continual tension in such a way that the individual pieces to not touch each other while the tensioned pieces (for example, twine or wire) delineate the system’s structure. In other words, one is left wondering how the individual pieces seem to float in mid-air. This model contains the bars and top/bottom pieces for a pyramid type of structure.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 1 hour 10 minutes
    • Total filament 3.8 m
    • Additional non-printable components
    • Printed all at once
    Big Gripper Big Gripper

    Big Gripper

    A big gripper will helps open tightly closed bottles. For printing, use a 0.2mm layer height to save some time. There is no post processing needed for this model.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: 0.2mm layer height 1.2 mm shell
    • Total print time 2 hours 30 minutes
    • Total filament 7.8 m
    • Additional non-printable components
    • Printed all at once
    Birdhouse 1 Birdhouse 1

    Birdhouse 1

    Different bird species prefer different types of birdhouses. This model, shaped like an actual house, provides a perch in addition to a safe haven from predators.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 13 hours 30 minutes
    • Total filament 56 m
    • Additional non-printable components
    • Printed all at once
    Birdhouse 2 Birdhouse 2

    Birdhouse 2

    This simple birdhouse provides an in and out opening. Let’s see if the birds use the right openings!
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 8 hours 10 minutes
    • Total filament 31.3 m
    • Additional non-printable components
    • Printed all at once
    Birdhouse 3 Birdhouse 3

    Birdhouse 3

    This birdhouse includes a stand so that the round shape sits nicely and can be placed anywhere.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 9 hours 30 minutes
    • Total filament 36.9 m
    • Additional non-printable components
    • Printed all at once
    Birdhouse 4 Birdhouse 4

    Birdhouse 4

    This cone shaped birdhouse provides ample standing room space when birds need to shelter or tuck themselves in for the night.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: On/Off
    Advanced settings: Default
    • Total print time 25 hours 30 minutes
    • Total filament 91.6 m
    • Additional non-printable components
    • Printed all at once
    Birdhouse 5 Birdhouse 5

    Birdhouse 5

    This Birdhouse 5 model is a variation design compared to the designs contained in the Birdhouse lesson. It adds a base, a cap and turrets to the final design.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 18 hours 45 minutes
    • Total filament 92.8 m
    • Additional non-printable components
    • Printed all at once
    Bottle opener Bottle opener

    Bottle opener

    A grip that that helps to open bottles. This print, like many others in this lesson, relies on the toughness of the printed object. Use more perimeters than normal (3-4) to get a bottle opener strong enough to do its job.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: 0.2mm layer height 1.2 mm shell
    • Total print time 30 minutes
    • Total filament 1.6 m
    • Additional non-printable components
    • Printed all at once
    Caffeine Molecule Caffeine Molecule

    Caffeine Molecule

    Caffeine is found in the leaves and beans of the coffee plant, in tea, yerba mate, and guarana berries, and in small quantities in cocoa, the kola nut and the Yaupon Holly. Overall, caffeine is found in the beans, leaves, and fruit of over 60 plants. It is an interesting molecule chemically because it is made up of a 5-membered ring and a 6-membered ring. Assembly is easy.
    CCBY

    Recommended print settings

    Print profile: Fine
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 28 hours
    • Total filament 34 m
    • Additional non-printable components
    • Printed all at once
    Casting mold Casting mold

    Casting mold

    In this lesson, students learn what casting molds are and design their own mold. Then they use either chocolate, wax, soap or gelatin as casting material to see if the fluid filled the mold’s cavity completely. How complex the casting model is can affect the overall look of the created object.
    CCBYNC

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: 0.2 mm layer height. Roof and bottom thickness 1.2mm, shell thickness 1.2mm
    • Total print time 25 hours 15 minutes
    • Total filament 57.3 m
    • Additional non-printable components
    • Printed all at once
    Castle 1 Castle 1

    Castle 1

    An easy to print model of a simplified medieval castle. Supports need to be removed from under the flag. The model can be scaled down a bit to reduce the amount of material used and printing time.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 3 hours
    • Total filament 6.5 m
    • Additional non-printable components
    • Printed all at once
    Castle 2 Castle 2

    Castle 2

    An easy to print model of a simplified medieval castle. The model can be scaled down a bit to reduce the amount of material used and printing time.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 3 hours
    • Total filament 6.5 m
    • Additional non-printable components
    • Printed all at once
    Castle 3 Castle 3

    Castle 3

    An easy to print model of a simplified medieval castle. Supports need to be removed from under the flag. The model can be scaled down a bit to reduce the amount of material used and printing time.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 3 hours
    • Total filament 6.5 m
    • Additional non-printable components
    • Printed all at once
    Cell Stand 1 Cell Stand 1

    Cell Stand 1

    Simple cell phone stand without a hole for a cable
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: 0.2 mm layer height
    • Total print time 19 hours
    • Total filament 11.5 m
    • Additional non-printable components
    • Printed all at once
    123456