3D model database

Tip: Complementary lesson plans are available for 3D models marked with zavřít
Tip: Become a licensed YSoft be3D eDee user.​ Premium 3D lesson plans for YSoft be3D eDee users are available for 3D models marked with zavřít
Show filter Hide filter
Sort by: Result count  for
    : 140
    Tensegrity Table Tensegrity Table

    Tensegrity Table

    Tensegrity is a structural principle based on individual pieces under compression inside a structure that is under continual tension in such a way that the individual pieces to not touch each other while the tensioned pieces (for example, twine or wire) delineate the system’s structure. In other words, one is left wondering how the individual pieces seem to float in mid-air. This model contains the bars and top/bottom pieces for a table type of structure.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: On/Off
    Advanced settings: Default
    • Total print time 3 hours 5 minutes
    • Total filament 18.5 m
    • Additional non-printable components
    • Printed all at once
    Tensegrity Table Reinforced Tensegrity Table Reinforced

    Tensegrity Table Reinforced

    Tensegrity is a structural principle based on individual pieces under compression inside a structure that is under continual tension in such a way that the individual pieces to not touch each other while the tensioned pieces (for example, twine or wire) delineate the system’s structure. In other words, one is left wondering how the individual pieces seem to float in mid-air. This model has more complex bars and top/bottom pieces.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: On/Off
    Advanced settings: Default
    • Total print time 4 hours 30 minutes
    • Total filament 16.7 m
    • Additional non-printable components
    • Printed all at once
    Tesla Valve Tesla Valve

    Tesla Valve

    The Tesla Valve project consists of four pieces. The valve body is the main piece containing the valvular conduit. The valve top covers the main piece. Lastly, two outlet pieces enable the attachment and inflation of a balloon for testing the valve. 
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: layer height 0.2 mm, roof and bottom thickness 1.2 mm, shell thickness 1.2 mm
    • Total print time 9 hours 5 minutes
    • Total filament 27.9 m
    • Additional non-printable components
    • Printed all at once
    Tetrahedron Dice Tetrahedron Dice

    Tetrahedron Dice

    Tetrahedron dice with four sides. Typically used for Dungeons and Dragons and similar RPG board games. 
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Set roof and bottom thickness to 1.2mm. Set shell thickness to 1.2mm
    • Total print time 1 hour 15 minutes
    • Total filament 1.45 m
    • Additional non-printable components
    • Printed all at once
    THEOBROMINE THEOBROMINE

    THEOBROMINE

    Similar to the caffeine compound, Theobromine also acts as a stimulant. This compound is common in cocoa and chocolate, and to a lesser extent, in tea. This model along with the other chemical compounds can make a nice gift set for the science lover in your life.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: None
    • Total print time 1 hour 30 minutes
    • Total filament 3.02 m
    • Additional non-printable components
    • Printed all at once
    Tic-Tac-Toe Board Tic-Tac-Toe Board

    Tic-Tac-Toe Board

    A simple 3 x 3 board for playing Tic-Tac-Toe. Print out the traditional X’s and O’s or use any of the alternative game pieces to complete the game set: Mr. and Mrs. Pacman, Sun and Moon Pieces, Tic Tac Toe Cross Piece, Tic Tac Toe Circle Piece, Chess Pieces. The traditional game has nine spaces so how many pieces do you need? For detailed print instructions of each pieces download the lesson resources. 
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Layer height to 0.2 mm
    • Total print time 2 hours 15 minutes
    • Total filament 7.2 m
    • Additional non-printable components
    • Printed all at once
    TIDAL DEFENSES TIDAL DEFENSES

    TIDAL DEFENSES

    The Tidal Defenses model introduces how shorelines and riverbanks are protected from hydraulic erosion.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: 0.2 layer height, 1.2 shell thickness, 1.2 roof thickness
    • Total print time 17 hours 30 minutes
    • Total filament 53.5 m
    • Additional non-printable components
    • Printed all at once
    Trammel of Archimedes Trammel of Archimedes

    Trammel of Archimedes

    A trammel of Archimedes is a mechanism that generates the shape of an ellipse. It consists of two shuttles which are confined (trammeled) to perpendicular channels or rails and a rod which is attached to the shuttles by pivots at fixed positions along the rod. Use the picture as a guide to put the moving parts in the correct rails during assembly. Don’t tighten the screws too much. 
    CCBY

    Recommended print settings

    Print profile: Fine
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 22 hours
    • Total filament 28 m
    • Additional non-printable components
    • Printed all at once
    Triodin Board Triodin Board

    Triodin Board

    Thought to be one of the oldest strategic games of the ancient Greek world. It has been found carved into the stairways of the Parthenon. This model includes playing pieces A/B. For detailed print instructions of Triodin pieces download the lesson resources.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Layer height to 0.2 mm
    • Total print time 2 hours 30 minutes
    • Total filament 7.3 m
    • Additional non-printable components
    • Printed all at once
    Two Stroke Engine Two Stroke Engine

    Two Stroke Engine

    A two-stroke (or two-cycle) engine is a type of internal combustion engine which completes a power cycle with two strokes (up and own movements) of the piston during only one crankshaft revolution. Some parts are a bit loose and need to be glued into place.
    CCBY

    Recommended print settings

    Print profile: Fine
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 23 hours
    • Total filament 31 m
    • Additional non-printable components
    • Printed all at once
    Universal grip Universal grip

    Universal grip

    The grip is useful for carrying plastic bags without straining your fingers and palm. Print with supports on at any layer height; the supports are easy to remove by hand or by using pliers.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 7 hours
    • Total filament 10.3 m
    • Additional non-printable components
    • Printed all at once
    Universal mount Universal mount

    Universal mount

    A mount with a M10 inside thread can be used with any attachment with the same size thread. Print with or without a support; if a support is used, it can be easily removed (unscrew it with a flat head screwdriver).
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 6 hours 30 minutes
    • Total filament 8.1 m
    • Additional non-printable components
    • Printed all at once
    Vessel 1 Vessel 1

    Vessel 1

    Small perfume bottle based on the hexagonal prism shape. No post processing is needed. Print without supports.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Layer height 0.2 mm
    • Total print time 40 minutes
    • Total filament 1 m
    • Additional non-printable components
    • Printed all at once
    Vessel 2 Vessel 2

    Vessel 2

    Hexagonal prism-based perfume bottle.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 1 hour 15 minutes
    • Total filament 1.6 m
    • Additional non-printable components
    • Printed all at once
    Vessel 3 Vessel 3

    Vessel 3

    Simple perfume bottle prototype based on a cylindrical shape. Easy to print and does not require supports and post-processing.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Layer height 0.2mm
    • Total print time 1 hour 15 minutes
    • Total filament 1.6 m
    • Additional non-printable components
    • Printed all at once
    Vessel 4 Vessel 4

    Vessel 4

    Free standing perfume bottle prototype. Does not require any support or post-processing.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Layer height 0.2mm
    • Total print time 1 hour 15 minutes
    • Total filament 1.4 m
    • Additional non-printable components
    • Printed all at once
    Vessel 5 Vessel 5

    Vessel 5

    Perfume bottle that is made from a compound geometric shape. Does not require any support or post-processing.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Layer height 0.2mm
    • Total print time 2 hours 30 minutes
    • Total filament 3.6 m
    • Additional non-printable components
    • Printed all at once
    WOLF WOLF

    WOLF

    An additional model that can be used in the Geometric Animal Art lesson. These social animals hunt in packs and are common in Eurasia and North America.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: None
    • Total print time 40 minutes
    • Total filament 1.64 m
    • Additional non-printable components
    • Printed all at once
    WOLF HEAD WOLF HEAD

    WOLF HEAD

    An up close and personal look at a wolf’s head. Did you know the Latin word for dog is Canis and specifically, the Latin word for our domestic canine friends is Canis familiaris. When it comes to wolves, the Latin classification is Canis lupus.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: None
    • Total print time 40 minutes
    • Total filament 1.71 m
    • Additional non-printable components
    • Printed all at once
    X-Wing Card X-Wing Card

    X-Wing Card

    Futuristic space jet has many parts that are printed flat and then assembled into a 3D model. 
    CCBYSA

    Recommended print settings

    Print profile: Fine
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 1 hour 15 minutes
    • Total filament 1.5 m
    • Additional non-printable components
    • Printed all at once
    1234567