3D model database

Tip: Complementary lesson plans are available for 3D models marked with zavřít
Tip: Become a licensed YSoft BE3D eDee user.​ Premium 3D lesson plans for YSoft BE3D eDee users are available for 3D models marked with zavřít
Show filter Hide filter
Sort by: Result count  for
    : 163
    LABYRINTH

    LABYRINTH

    Labyrinth is a game of physical skill. The object of the game is to tilt the game board to guide the marble to the end of the maze, without letting it fall into any of the holes. This model consists of three parts: Maze Top, Maze Bottom, Maze Ball. Good luck in your game.
    CCBYSA

    Recommended print settings

    Print profile: Fast
    Initial platform: None
    Print supports: Off
    Advanced settings: 0.2 mm layer height
    • Total print time 7 hours 30 minutes
    • Total filament 16.6 m
    • Additional non-printable components
    • Printed all at once
    Lamp 1

    Lamp 1

    Projecting the Cassiopeia constellation on walls or ceilings can be accomplished with this 3D lamp model. 
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Support starting angle 65°
    • Total print time 17 hours
    • Total filament 40 m
    • Additional non-printable components
    • Printed all at once
    Lamp 2

    Lamp 2

    An alternative constellation and lamp design for projecting star constellations on walls or ceilings. 
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Support starting angle 65°
    • Total print time 17 hours
    • Total filament 40 m
    • Additional non-printable components
    • Printed all at once
    Loaded Dice

    Loaded Dice

    Loaded dice with a higher chance of favoring the side with a number 6. The sum of the numbers on opposing sides is 7. The corners are rounded to increase the rotation of the dice.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Set infill to 100%
    • Total print time 2 hours 30 minutes
    • Total filament 6.7 m
    • Additional non-printable components
    • Printed all at once
    Loaded Dice Cutout

    Loaded Dice Cutout

    Cutout of the loaded dice that will help you demonstrate how the loaded dice is rigged.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 2 hours
    • Total filament 2.3 m
    • Additional non-printable components
    • Printed all at once
    Mars Lander

    Mars Lander

    Contains all the models and support pieces to print a Mars lander vehicle as a Credit Card Kit.
    CCBYSA

    Recommended print settings

    Print profile: Fine
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 8 hours
    • Total filament 9.5 m
    • Additional non-printable components
    • Printed all at once
    Martryoska Chicken

    Martryoska Chicken

    Nesting dolls can take any shape or theme. The chicken and egg theme has the mother hen sitting on her eggs. Adding feet, wings and a comb to the hen brings the theme to life.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 7 hours 30 minutes
    • Total filament 17.6 m
    • Additional non-printable components
    • Printed all at once
    Matryoska Doll

    Matryoska Doll

    Known as Russian nesting dolls, this model can be reduced in size to get the number of nested dolls required. The final doll, the smallest one, is printed as one piece while the others are printed as tops and bottoms. The models can be painted to bring the theme alive.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 8 hours
    • Total filament 19.5 m
    • Additional non-printable components
    • Printed all at once
    Maxwell Wheel

    Maxwell Wheel

    The Maxwell Wheel is a classic device used to demonstrate the conservation of mechanical energy and its conversion into another form of energy such as Kinetic energy. By rotating the wheel by hand, the supporting cords move to the top and, when released, the energy conversion occurs as the wheel falls. Once at the bottom, kinetic energy changes to potential energy as the wheel’s movement rolls the cords up again. This motion and resulting energy conversion continues until all the energy is used due to friction.
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: None
    • Total print time 4 hours 5 minutes
    • Total filament 8.41 m
    • Additional non-printable components
    • Printed all at once
    Medal 1

    Medal 1

    If your school is having any kind of competition, why not 3D print some award medals? This model is for first place producing a medal with a number 1 on it.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 20 minutes
    • Total filament 1.5 m
    • Additional non-printable components
    • Printed all at once
    Medal 2

    Medal 2

    Congratulations! 2nd place is an achievement. This model prints a congratulatory medal with the number 2 on it.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 20 minutes
    • Total filament 1.5 m
    • Additional non-printable components
    • Printed all at once
    Medal 3

    Medal 3

    When creating awards for any kind of competition, be sure to have a 3rd place winner too. This model produces a medal with the number 3 and a bicycle on it. Combine it with Medal 1 and Medal 2 for your top three winners.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 20 minutes
    • Total filament 1.5 m
    • Additional non-printable components
    • Printed all at once
    Medal 4

    Medal 4

    Sometimes you want to recognize everyone who participates in a competition or just for a job well done. This model produces a medal with the words “Well Done” on it.
    CCBYSA

    Recommended print settings

    Print profile: Speed
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 20 minutes
    • Total filament 1.5 m
    • Additional non-printable components
    • Printed all at once
    Mini Grabber

    Mini Grabber

    Mini grabbers are tools that use a scissor mechanism to grab various objects. They are suitable for collecting items that are difficult to reach or for individuals who have trouble grasping.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 5 hours
    • Total filament 10.5 m
    • Additional non-printable components
    • Printed all at once
    Miniature ornate table leg

    Miniature ornate table leg

    Miniature ornate table leg from the Lathe lesson. Print on default settings and without supports. 
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 3 hours
    • Total filament 5.38 m
    • Additional non-printable components
    • Printed all at once
    MOON PHASES

    MOON PHASES

    Explore the different phases of the moon with this 3D model set.  
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: None
    • Total print time 1 hour
    • Total filament 2 m
    • Additional non-printable components
    • Printed all at once
    Mousetrap Racer

    Mousetrap Racer

    A simple mousetrap provides the power in this 3D printed racer. The racer uses the stored mechanical potential energy of a spring to create forward motion, using that energy to unwind a axle string creating a rotational action, which in turn, makes the wheels turn. Pliers and a knife are needed to remove the supports. Super glue, files or sandpaper are needed for final assembly.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: On
    Advanced settings: Default
    • Total print time 18 hours 50 minutes
    • Total filament 53 m
    • Additional non-printable components
    • Printed all at once
    Multi-color Mini Plant cell

    Multi-color Mini Plant cell

    This model can be used to explore the different parts of a plant cell. Each piece is printed and then easily glued together.
    CCBY

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 7 hours 10 minutes
    • Total filament 11 m
    • Additional non-printable components
    • Printed all at once
    Ocarina

    Ocarina

    Ancient wind instruments are typically flutes in a vessel shaped. They can be made out of various materials such as wood, metal, bone or plastic. There are many shape variations but each Ocarina has a mouthpiece and several finger holes. What magical music can you create with this design?
    CCBYSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: None
    • Total print time 7 hours 30 minutes
    • Total filament 13.79 m
    • Additional non-printable components
    • Printed all at once
    Oval bag tag

    Oval bag tag

    An oval nametag for keys or a schoolbag. Easy and quick to print.
    CCBYNCSA

    Recommended print settings

    Print profile: Default
    Initial platform: None
    Print supports: Off
    Advanced settings: Default
    • Total print time 30 minutes
    • Total filament 0.6 m
    • Additional non-printable components
    • Printed all at once
    123456789